IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 51)

Chapter 2
Manual IIS Setup
39
Configuring
the
IntelliTrack
Application
Pool This section applies to the Windows Vista, Windows 7, or Windows Server
2008 operating system. When you use a manual IIS setup option, you must
configure the IntelliTrack Application Pool in IIS Manager in order to
download/upload data to the workstation application.
Warning: If you are using the Windows Vista, Windows 7, or Windows
Server 2008 operating system, you MUST CONFIGURE the IntelliTrack
Pool in your IIS Manager in order to download/upload portable data to
the workstation application. If you do not configure the IntelliTrack Pool,
you will receive an error when you try to download/upload data from the
handheld device to the workstation application.
Note: The batch portable application limits items to 10 during data
upload while running in demo mode.
The IntelliTrack Application Pool is configured in IIS Manager. To config-
ure the IntelliTrack Application Pool, please refer to the instructions that
follow.
1. Open Internet Information Services (IIS) Manager.
• In Windows 7/Windows Vista, go to Control Panel > Administra-
tive Tools and open Internet Information Services (IIS) Manager.
• In Windows Server 2008, go to Start > Administrative Tools > IIS
Manager.
2. In the left pane, select Server Name > Application Pools.