The product will not turn on – HP Photosmart D5400 series User Manual
Page 71
This section contains the following topics:
•
•
I connected the USB cable, but I am having problems using the product with my
computer
•
After setting up the product, it does not print
•
The display shows the wrong language
•
The wrong measurements are showing in menus on the display
•
When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
•
The Minimum System Checks screen appears
•
A red X appears on the USB connect prompt
•
I received a message that an Unknown Error has occurred
•
The registration screen does not appear
•
Uninstall and reinstall the software
The product will not turn on
Try the following solutions if there are no light indications, no noise, and no movement
from the product when you turn it on.
•
Solution 1: Make sure you use the power cord that came with the product
•
•
Solution 3: Press the On button more slowly
•
Solution 4: Contact HP to replace the power supply
•
Solution 5: Contact HP support for service
Solution 1: Make sure you use the power cord that came with the product
Solution:
•
Make sure the power cord is firmly connected to both the product and the power
adapter. Plug the power cord into a power outlet, surge protector, or power strip.
1 Power connection
2 Power cord and adapter
3 Power outlet
Chapter 11
70
Troubleshooting
T
roub
les
hoot
ing