HP Photosmart D5400 series User Manual
Page 183
c. Use a fresh swab to wipe any accumulated ink and debris from the edge of
the print head.
d. Wipe the area dry with a dry swab before proceeding to the next step.
8.
Make sure the latch handle is raised, and then reinsert the print head.
9.
Carefully lower the latch handle.
NOTE:
Make sure you lower the latch handle before reinserting the ink
cartridges. Leaving the latch handle raised can result in incorrectly seated ink
cartridges and problems printing. The latch must remain down in order to
correctly install the ink cartridges.
10.
Reinsert the ink cartridges.
To reinsert the ink cartridges
▲ Using the colored shaped icons for help, slide the ink cartridge into the empty
slot until it clicks into place and is seated firmly in the slot.
Chapter 11
182
Troubleshooting
T
roub
les
hoot
ing