HP Photosmart D5400 series User Manual

Page 20

Insert the stack of paper into the main input tray with the short edge forward and the
print side down. Slide the stack of paper forward until it stops.

CAUTION:

Make sure that the product is idle and silent when you load paper

into the main input tray. If the product is servicing the ink cartridges or otherwise
engaged in a task, the paper stop inside the product might not be in place. You
could push the paper too far forward, causing the product to eject blank pages.

TIP:

If you are using letterhead, insert the top of the page first with the print side

down.

Slide the paper-width guide inward until it stops at the edge of the paper.
Do not overload the main input tray; make sure the stack of paper fits within the main
input tray and is no higher than the top of the paper-width guide.

Lower the output tray. Pull the tray extender towards you, as far as it will go.

NOTE:

When you use legal-size paper, leave the tray extender closed.

Load paper

Loa

d pape

This manual is related to the following products:

Photosmart D5463 Printer