Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 43)

Pearl Mini User Guide User interfaces and remote access
User interfaces and remote access
Pearl devices have several user interfaces:
l Touch screen: Easily accessible on the front panel of Pearl, Pearl-2, and Pearl Mini, the touch screen is
primarily used for confidence monitoring, live switching, and Single Touch streaming and recording
control, see
About the touch screen . For instructions to use the touch screen to start/stop scheduled
events or to authenticate with a Content Management System (CMS) and create unscheduled ad hoc
recordings and webcasts, see
CMS event controls using the touch screen .
l Admin Panel: A web-based user interface that's primarily used to perform system set up and
administrative tasks for your Pearl device. You can access the Admin Panel using an internet browser on
a computer or tablet that's connected to the same local Ethernet network as your Pearl device, or locally
using a USB mouse, keyboard, and monitor connected directly to the Pearl device. See
About the Admin
panel .
l Epiphan Live: A web-based user interface that's primarily used for confidence monitoring, statistics, live
switching, and recording control, see
Epiphan Live .
Start and stop recording/streaming, monitor video sources, view status and alerts, remote rescue
troubleshooting and more over the Internet using Epiphan Edge, see
Cloud-based device management . For
remote login access to your Pearl device, see Remote login to the Admin panel and Epiphan Live .
The touch screen - Pearl-2 and Pearl Mini
Use the touch screen to switch layouts, start and stop recording and streaming, configure network settings, load
configuration presets, and to view configured channels, audio meters, and system information.
Topics include:
l About the touch screen
l Record a channel using the touch screen
l Stream a channel using the touch screen
l Switching and mixing using the touch screen
l Single Touch streaming and recording control
l CMS event controls using the touch screen
l Configure the touch screen
To view system information using the touch screen, see View system information using the touch screen
To select the video source for the output port using the touch screen when local console is enabled, see Select
the video output source using the device screen .
BETA DRAFT - 32