Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 30)

Pearl Mini User Guide Install the power button shield
4. (Optional) Adjust the gain for an audio input source, select the input port from the Inputs menu and adjust
the amount of gain on the configuration page for the audio input port. Click Save when you're done. For
more details, see
Adjust audio gain and delay .
Install the power button shield
Install the power button shield over the power button to prevent accidentally turning the unit off. Once applied,
you cannot reposition the power button shield without damaging the adhesive.
Before you begin, clean the area around the power button to remove any dirt or grease.
1. To attach the adhesive to the back of the power button shield, remove the red adhesive backing and
carefully align the lower left corners before pressing firmly.
2. Remove the white adhesive backing and align the tab with the laptop lock key hole to position the power
button shield. Make sure the power button is clearly visible through the round hole before pressing firmly.
BETA DRAFT - 19