Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 319)

Pearl Mini User Guide Configure AFU to SFTP server parameters
2. Specify the target Server address. If your system is configured with DHCP or has a valid DNS
configuration (see Configure DHCP ), you can use the server’s fully qualified domain name instead of the
IP address.
3. Specify the Server Port used for the target FTP server. The standard port is 21.
4. Enter the FTP account username in the Login field.
5. Enter the FTP account password in the Password field. The characters are masked with dots.
6. Select Use temp file to name files with a temporary filename extension (.part) on the server until upload is
complete.
7. Click Apply.
Configure AFU to SFTP server parameters
You can automatically upload recordings to a secure FTP (SFTP) server when you select SFTP as the AFU
protocol transfer type using the Admin panel.
The following table describes the parameters to configure AFU to an SFTP server.
Table 58 SFTP Automatic Upload Configuration Parameters
Name Description
Server
address
The IP address or fully qualified domain name of the SFTP server.
Server port The port used by the target SFTP server. Standard port is 22.
Login Username for the SFTP server.
Password Password for the SFTP user.
Use temp file
Causes files to be named with .part extension on the server during active upload. When the
upload completes, the file is renamed to the appropriate extension (.mov, .mp4 or .avi).
Prerequisites
l Channels and recorders are already added for AFU, see Set channels and recorders to include in AFU .
l AFU is enabled and the parameters configured, see Enable AFU, schedule, and set options .
Configure AFU upload to an SFTP server using the Admin panel
1. From the Automatic File Upload configuration page, select SFTP Client as the protocol transfer type.
308