Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 255)

Pearl Mini User Guide Enable HLS (pull)
Retrieve the stream URL for your viewers using the Admin panel
1. Login to the Admin panel as admin, see Connect to the Admin panel .
2. From the Channel(s) menu, select the channel and click Status. The Status page appears.
3. Record the Live broadcast, RTSP stream URL or other web streaming address. This is the address you
can send to viewers or use to create a link to your broadcast.
If you're seeing URLs with serial numbers instead of IP addresses and want to change this, log into
the Admin panel by IP address (instead of by Serial number/Bonjour Print Services) to see
URLs with the IP address, see
Connect to the Admin panel .
Enable HLS (pull)
Stream a live broadcast of a channel directly to viewers on the same local network as Pearl Mini using
HTTP over port 80. This gives viewers with iOS devices convenient access to the channel's live broadcast. If
HTTPS is configured for Pearl Mini, the traffic from port 80 is redirected to HTTPS port 443.
HTTP Live Stream (HLS) supports the H.264 codec and MP3 or AAC audio encoding. Audio and video are sent
as a series of small files called media segment files. You can set the segment duration, as well as define the
playlist size using the Admin panel. By default, the segment duration is 9 seconds and the playlist size is 3.
When live broadcasting a channel using HLS (pull), there is approximately a 30 second delay.
Enable HLS (pull) streaming using the Admin panel
1. Login to the Admin panel as admin, see Connect to the Admin panel .
2. From the Channel(s) menu, select the channel containing video you want to stream and click Streaming.
The Streaming configuration page opens.
3. Under HTTP Live Streaming (HLS), check Enabled.
4. (Optional) Set the Segment duration and Playlist size.
244