Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 105)

Pearl Mini User Guide Configure DHCP
l Restore factory settings, which clear all your custom settings. See Perform a factory reset .
l Load a configuration preset file that uses DHCP networking. For more information, see:
l Apply a configuration preset using the Admin panel
l Pearl-2 and Pearl Mini - Apply a configuration preset using the touch screen
l Change the network settings manually using either the device screen or the Admin panel.
Manually select DHCP as the network type using the Admin panel
1. Login to the Admin panel as admin, see Connect to the Admin panel .
2. From the Configuration menu, select Network. The Network configuration page opens.
3. Choose Yes from the Use DHCP drop-down and change the MTU Size if needed, then click Apply.
Table 20 DHCP Fields
Label Description/Options
Use DHCP Select this option to dynamically obtain an IP address at boot up using DHCP
Use static
address
Only select this option if you want to use the configured static IP address instead.
MTU Size
The maximum transmission unit (MTU) specifies the maximum packet size for
transfer on the network. The default value is 1500, which is the largest value allowed
by Ethernet at the network layer. It’s best for all nodes in your network to use the
same value. Only change this value if you know that other nodes use a different
value.
4. Reboot the Pearl device when prompted. From the Configuration menu, select Maintenance and click
Reboot Now on the maintenance page.
94