Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 23)

Pearl Mini User Guide Monitoring audio
Label Name Description
HDMI output port See Video output ports for details.
RJ-45 Ethernet
Auto-sensing gigabit Ethernet 10/100/1000 Base-T network port with
support for RTSP, SRT, and NDI|HX networked video inputs. See
Configure network settings for setup instructions.
SDI in Connect up to 3G SDI signals to Pearl Mini.
HDMI in Connects HDMI and DVI signals (using an adapter) to Pearl Mini.
RCA audio in
RCA consumer line-level stereo pair (left/right) audio inputs. See Pearl
Mini AV inputs .
3.5 mm audio in
Stereo mic-level input to connect a passive or active stereo electret
microphone.
XLR/TRS combo jacks
Two XLR /TRS combo jacks that can function as a stereo pair
(left/right) or as two mono inputs. See
Pearl Mini AV inputs .
l Two XLR mic-level (balanced)
l Two TRS ¼" professional line-level, +4 dBu
(balanced/unbalanced)
Phantom power light
Glows when 48 V phantom power is enabled. Phantom power is
applied to both XLR audio input ports when enabled. See
Enable or
disable phantom power on Pearl Mini .
WARNING: Connecting devices that are not designed for
phantom power when phantom power is enabled for the two
XLR ports can seriously damage those devices. Always check
the phantom power LED before connecting devices to the XLR
ports.
Monitoring audio
The front panel includes a 3.5 mm headphones audio jack for monitoring audio. To monitor the audio for a
channel, just select the channel using the device screen. The audio you hear depends on the audio source
configured in the live channel layout.On Pearl Mini and Pearl-2, different layouts can have different audio
sources configured.
BETA DRAFT - 12