Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 171)

Pearl Mini User Guide Apply a configuration preset using the Admin panel
After a configuration preset has been created, you can select which sections of the
configuration preset to apply. For more information, see
Apply a configuration preset using
the Admin panel .
5. Click Save. Your configuration preset appears in the list.
Apply a configuration preset using the Admin panel
When you apply a configuration preset, the system settings for all included configuration groups are updated.
Other settings on the system are not affected. For example if you apply a preset that includes the configuration
groups channels and automatic file upload, your network settings, passwords, time server, source
configurations, etc are not modified. Similarly, if you apply a configuration preset that has only network settings
included, only the network settings change.
If you apply a preset that has the network or system configuration group, a reboot is required. If you apply a
preset that has the EDID configuration group, the system may appear unresponsive for a short time while it
applies these EDIDs to the video grabbers.
You can verify which configuration groups are included in a preset by looking at the list to the right of the
configuration preset name. The term 'all' means all groups are included. Otherwise groups are listed individually.
You may apply multiple presets one after another. If you apply two (or more) configuration presets
that include a particular configuration group, the settings (for that group) from the last applied preset
are the active settings. In short, last in wins.
Apply a configuration preset using the Admin panel
1. Log in to the Admin panel as admin, see Connect to the Admin panel .
2. From the Configuration menu, click Maintenance. The maintenance page opens.
3. In the Configuration presets section, select which sections of the configuration you wish to apply.
For example, if you have imported a configuration preset and don't want to apply the Network section,
clear the Network check box for the configuration preset. If you want to apply all of the sections, skip to the
next step.
4. Click Apply selected below the configuration preset you want to apply.
5. Click OK when prompted. The Pearl device reboots automatically if the configuration preset includes the
network or system configuration groups.
Apply a configuration preset using the touch screen
You can use the touch screen on Pearl Mini and Pearl-2 to apply configuration presets that are either stored
locally on the internal storage of Pearl or from a USB drive that is attached to a USB port on Pearl. See below for
instructions on how to prepare the USB drive and use it to apply a configuration preset to your Pearl.
160