Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 239)

Pearl Mini User Guide Connect an AV.io video grabber
d. Timeout: Select an amount of time with no signal before the No Signal image appears.
4. Click Apply.
Connect an AV.io video grabber
You can connect an Epiphan AV.io frame grabber to a USB input port just the same as you would connect a web
camera.
Pearl Mini treats the video source from the frame grabber just like any other video source.
Use AV.io frame grabbers to connect extra HDMI, DVI, or SDI sources.
You can set up and operate frame grabbers using the same Configure a video input source
l AV.io HD: https://www.epiphan.com/userguides/avio-hd/Content/Home-AVioHD.htm
l AV.io SDI: https://www.epiphan.com/userguides/avio-sdi/Content/Home-AVioSDI.htm
Preview a video source using the Admin Panel
You can preview the images captured from your video sources in the Admin panel.
Pearl-2 and Pearl Mini - You can also preview your sources using the Epiphan Live control interface, see
Monitor video and audio input sources using Epiphan Live .
Preview an input source using the Admin panel
1. Login to the Admin panel as admin, see Connect to the Admin panel .
2. Ensure a source is connected to the input port.
3. From the Inputs menu, click the source name. The configuration page for the source opens. A preview
appears at the bottom of the page.
Rename an input port
The input port names are used when adding your video and audio sources to channels. A channel that has only
one source is automatically assigned the same name as the input source by default. If you change the name of
the input source, the channel name will update automatically to match.
Sometimes it's helpful to configure the input port name to match the data it's capturing so that it's clear what the
channel is capturing. Alternately you can change the channel's name, see
Rename a channel .
For a complete list of international characters supported, see International character support .
To change an input port name:
1. Login to the Admin panel as admin, see Connect to the Admin panel .
2. From the Inputs menu, click the source name. The configuration page for the source opens.
228