Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 241)

Pearl Mini User Guide Add a custom No Signal image
Value Description
Image
This menu allows you to choose a custom no-signal image for the channel. The drop-
down list gives you the option to choose the default image or any image you have
uploaded through the
Add a custom No Signal image
Timeout
The timeout represents the number of seconds after losing the signal that the no-signal is
displayed. You may change this number to adjust how soon you wish the no-signal
image to appear after the signal disappears.
Add a custom No Signal image
By default the system displays a No Signal image when there is no video signal coming in to any of the video
input ports on the Pearl device. You can customize this image to display a different message to your viewers. For
example if a viewer logs in early, or if you are experiencing delays you could indicate the start time (or expected
resolution time) using the no signal image.
Before you can specify a custom No Signal image for an input port on a Pearl device, you must upload the image.
For more information, see
Upload or remove an image or video file using the Media page .
Set the no signal image for an input port using the Admin panel
1. Login to the Admin panel as admin, see Connect to the Admin panel .
2. From the Inputs menu, click the source name. The configuration page for the source opens.
3. In the "No signal" image section, select an image from the Image drop down list.
4. In the Timeout field, enter the number of seconds before the No Signal image is displayed. If no manual
value is entered, the default time to display is 5 seconds.
5. Click Apply.
230