Epiphan Pearl Mini Live Video Production System with 512GB SSD (NA/JP) - Manual (Page 125)

Pearl Mini User Guide Enable or disable phantom power on Pearl Mini
l One 3.5 mm stereo mic-level for electret microphones
l One RCA stereo pair consumer line-level input (-10 dBV)
The two XLR/TRS combo jacks on Pearl Mini are configured as a stereo pair by default. You can configure the
two combo jacks as two separate mono audio inputs using the Admin panel . You can also enable or disable
phantom power for the two XLR ports.
The RCA and 3.5 mm audio sources share the same resource and appear under the label RCA/3.5 mm Audio.
You can assign one or both audio sources to the RCA/3.5 mm Audio input.
For details about the audio inputs, see Pearl Mini AV inputs .
Enable or disable phantom power on Pearl Mini
Phantom power is not enabled on the XLR audio input ports by default on Pearl Mini. You can enable 48 V
Phantom power for the two XLR ports using the Admin panel.
When phantom power is enabled:
l 48 V phantom power is applied to both XLR port 1 and XLR port 2.
l The phantom power LED beside the XLR/TRS combo jacks on the rear panel of Pearl Mini is solid on.
Connecting devices that are not designed for phantom power when phantom power is enabled for
the two XLR ports can seriously damage those devices. Always check the phantom power LED
before connecting devices to the XLR ports. A direct box can be used to provide the correct mic-level
signal to the XLR port and offers some isolation protection in case of accidental exposure to 48 V
phantom power.
Enable or disable phantom power using the Admin panel
1. Login to the Admin panel as admin, see Connect to the Admin panel .
2. From the Inputs menu, click XLR/TRS Audio. The XLR/TRS Audio page opens.
3. Check Phantom power 48V, then click Apply.
114