Grass Valley XtenDD v.4.2.4 - Manual (Page 398)

3. Menu Operation
3 – 251 Operating Instructions – Rev. 1 / 7.2002
Index card for aux bus name settings.
This configuration card is to be used if you want to have source names at the Exter-
nal Aux Bus and the router control protocol excludes the name transfer. E.g. ASCII
protocol. The 4digit names occur at the external aux bus source and they are fixed
for each external aux bus.
Router control protocols with a name transfer do not need the setting here. These
protocols are able to grab the name from the external control unit, e.g. Prosan.
Aux Name