Grass Valley XtenDD v.4.2.4 - Manual (Page 179)

3. Menu Operation
3 – 32 Operating Instructions – Rev. 1 / 7.2002
The DVE effect can also be moved using the Fader or AUTO with the MiscFunc-
tion facility (to be found in the M/E menu). The DD35 production switcher has – like
most other switchers – visible image components (BGD-A, BGD-B, Key1, Key2,
(Key 3) ). Additionally, the DD35 has invisible image components for flexible con-
trol purposes. These are called Misc 1 and Misc 2, and treated logically as if they
were Key components i.e. can be mixed in and out, value is between 0% and 100%.
They can also be selected for Next Transition. The speciality of these components
is: for each of these components, the user can select a function – the MiscFunc-
tion – that is controlled by the component.
Press the associated function button to define the DVE as the function to be con-
trolled dy the invisible components Misc1 or Misc2 (see function buttons below).
Recall the single M/E Preset
Factory Preset Recall the factory preset
Operation Preset Recall the user defined operation preset. See below to store
the user defined operation preset.
All stop Press the associated button to stop or reset the
following functions:
D
stops all ongoing auto transitions
D
sets FTB to inactive (100%)
D
sets transition type to MIX
D
in non-layer mode:
– moves BGND transition to start position
– removes all keyers
– set Next Transition BGND
– resets Next Transition for all other components.
D
in layer mode
– moves all layers which are not in an end position into the
start position of the current direction
– sets Next Transition Layer A
– resets Next Transition for all other components.
D
This command does not
– influence matrix crosspoints
– stop TiM/E timeline play or TiM/E snapshot dissolve.
Misc 1 Func
Misc 2 Func
Recall Preset