Grass Valley XtenDD v.4.2.4 - Manual (Page 100)

2. Panel Operation
2 – 71 Operating Instructions – Rev. 1 / 7.2002
Aspect The Aspect key permits adjusting the aspect ratio of the wipe pattern.
The following adjustments are possible:
H-ST horizontal stretch
V-ST vertical stretch
RATio By clockwise or counter-clockwise rotation the
wipe pattern may be stretched horizontally and/or
vertically.
Note: Please note that in Stretch, a linear piece is inserted in the wipe pat-
tern. With Ratio, the aspect ratio of height and width is changed.
Please note also the width of the borders with Stretch and Ratio.
The settings of one wipe generator can easily be copied to another. Similarly, both
settings may be exchanged.
For further information please refer to the section Menu operation.
Copying wipe
settings