Grass Valley XtenDD v.4.2.4 User Manual

Page 138

2. Panel Operation

2 – 109

Operating Instructions – Rev. 1 / 7.2002

2.16

FAST COPY

The fast Copy mode serves the fast copying of complete switcher settings between
the individual M/Es or between individual functions (e.g. Wipe1/2, Key1,2,3 etc.).

2.16.1

ENABLE THE FAST COPY MODE

The enable of the mode is made in the panel Setup. Details are contained in section
4 of this manual.

2.16.2

COPYABLE FUNCTIONS

The following table shows the copyable functions. For copying, the corresponding
source and destination buttons have to be simultaneously (first the source button,
then the destination button) pressed for the duration of 2 seconds.

Source

Destination

Buttons

Note

P/P ... M/E3

Transition group:

Trans Dur

Note 1

M/E1 Memo ... Master Memo

Memo group:

Edit
Store

Note 2

P/P Wipe1 ... M/E Wipe2

Wipe group:

Wipe1
Wipe2

Note 3

P/P Key1 ... M/E3 Key3
(BgdB in Layer mode)

Key group:

Key1
Key2
Key3
Key4

DSK group:

DSK1
DSK2
DSK3
DSK4

Note 3

P/P ext DSK1 ... DSK3

DSK group:

DSK4
DSK5
DSK6

Note 3

Note 1:

Copies complete M/E without TiM/E Memos.

Note 2:

Edit copies all register files.
Store copies the contents of the actual source register into the
selected destination register.

Note 3:

Copies operational data.