Grass Valley XtenDD v.4.2.4 - Manual (Page 20)

1. General
1 -- 9 Operating Instructions -- Rev. 1 / 7.2002
1.6 BASIC MAINFRAME AND OPTIONS
1.6.1 GENERAL
All switchers of this series have serial digital inputs and outputs. Preview (PVW)
is included. Peripheral protocols (with some exceptions, see below) are included
according to the current state of development.
MaKE Memo allows users to program the buttons of the DSK selection row with Key
Macros, incl. an identification name. Macros are single actions like GPO, recall of
TiM/E Memo Registers or entire sequences of button strokes. The recall takes
place within one Keyframe, but in the sequence the buttons strokes had been re-
corded before.
TiM/E Memo system (storage of 99 snapshots and / or timelines). Access definition
and user log--in possible (similar to EXTRA, known from DD10--30).
Store and Recall for Resource settings is possible for all M/Es separately, i.e. 99
Registers per M/E in addition to Master TiM/E Memo.
The ability is provided to store application specific Mixer settings on the provided
harddisk and to execute them any time. Such application specific settings may be:
Mnemonics names, TiM/E Memo register contents, KeyMemory settings, Macros,
4:3/16:9 mode etc.
Tally is not included.
1.6.2 BASIC MAINFRAMES
Production switcher for serial digital video signals according to ITU--R 601/656
including:
D 10 Bit Processing / 270 MBit/s
D 626 / 525 line standard, switchable or autodetect
D 4:3 / 16:9 switchable, manually or per GPI.
D 19”, 7 RU housing
D 20 m connection cable (50 ohms, cheapernet).
D RJ45 LAN connection optional