Grass Valley XtenDD v.4.2.4 - Manual (Page 322)

3. Menu Operation
3 – 175 Operating Instructions – Rev. 1 / 7.2002
Depending on the channel setup (architecture) the resulting video signal is avail-
able on the following DVx outputs:
Channel 1:
Single: DVX1 (video on superblack)
Pair 1 / 2: Combiner output video DVX 1, combiner output
key DVX 2.
Triple: Combiner output video DVX 1, combiner output
key DVX 2.
Quadruple: Combiner output video DVX 1, combiner output
key DVX 2.
Channel 2:
Single: DVX2 (video on superblack)
Pair 1 / 2: Combiner output video DVX 1, combiner output
key DVX 2.
Triple: Combiner output video DVX 1, combiner output
key DVX 2.
Quadruple: Combiner output video DVX 1, combiner output
key DVX 2.
Channel 3:
Single: DVX3 (video on superblack)
Pair 3 / 4: Combiner output video DVX 3, combiner output
key DVX 4.
Triple: Combiner output video DVX 1, combiner output
key DVX 2.
Quadruple: Combiner output video DVX 1, combiner output
key DVX 2.
Channel 4:
Single: DVX4 (video on superblack)
Pair 3 / 4: Combiner output video DVX 3, combiner output
key DVX 4
Triple: not possible on channel 4
Quadruple: Combiner output video DVX 1, combiner output
key DVX 2
The cube–builder always uses channels 1–3, that means, when you want to build
a cube you need a triple – or a quadruple if you want to used a cube (channel 1–3)
and channel 4 as an independent channel, all on one combiner output.
Depending on your channel settings you can run up to 4 DVx effects simulta-
neously.
Tip