Grass Valley XtenDD v.4.2.4 - Manual (Page 122)

2. Panel Operation
2 – 93 Operating Instructions – Rev. 1 / 7.2002
2.15.3.2 Define Memo in TiM/E Memo panel section
The TiM/E Memo panel permits a rough but fast filtering for storing and recalling
snapshots and timelines.
M/E1 M/E2 M/E3 P/P
Misc
Int
Misc
Ext
In generating a snapshot or a timeline, the lighting keys show which switcher
selections are stored. In recalling a snapshot or a timeline, the lighting keys show
which switcher sections are affected by the stored functions. If the recalled section
is smaller than the available target section, only the recalled section is affected.
Example:
Mixing level M/E1 is stored. The entire switcher is ready for recalling. Only M/E1
is affected, the other sections of the switcher remain unchanged.
The indication is also shown in the Define memo menu.
2.15.3.3 Relocating
When a snapshot or a timeline is recalled, the Relocate function permits address-
ing a different mixing level (M/E) than that used during storing, i. e. a relocation can
be switched.
1. Switch on source M/E. If several M/Es are selected as source, the M/E with the
highest number is used as a source.
2. Press Reloc
3. Switch on the target M/E.
This feature is only available in the Master TiM/E Memos.