Grass Valley XtenDD v.4.2.4 - Manual (Page 354)

3. Menu Operation
3 – 207 Operating Instructions – Rev. 1 / 7.2002
3.15.3.2 Function Buttons / Index Cards
For details refer to section Introduction.
The cursor buttons are used to navigate within the table.
Index card for installing the Aux Control Panels connected to the switcher control
panel. For Details refer to your the Planning and Installation Manual.
Type opens a pop-up window with all types of Aux Control Panels.
Port opens a pop-up window with all ports plus ”None” like in all other
menus where a port must be configured.
Note: The port must be different to the ports used for
DVEs, Editors, ext. DSKs, etc.
MPK Address opens the typewriter pop-up window.
The physical MPK address of the AUX-CP must be entered.
Refer to the label at the rear of the panel modules
(e.g. CP-3020: e0002d43).
Menu Lock
Cursor
→ ← ↑ ↓
Aux CP