Grass Valley XtenDD v.4.2.4 - Manual (Page 173)

3. Menu Operation
3 – 26 Operating Instructions – Rev. 1 / 7.2002
3.5.6 USER DEFINABLE PRESETS
User definable preset of the mainframe operational state is possible for a single
M/E or the complete switcher.
For a recall of the complete switcher preset select the Status menu. A single swit-
cher preset can be recalled in the M/Ex Main menu.
Refer to the Install E-Box menu for saving the preset data.
The following presets can be recalled:
Recall the factory preset.
Recall the user defined operation preset. See section Install E-Box to store the
user defined operation preset.
Recall the last user settings.
3.5.7 ATTACHED MACROS
This menu can be accessed in two ways:
D
via Config / Attached Macros menu
D
by clicking to “attached macros” button,
which is visible in all menus at the right side between the middle digipots. This
button is only visible when there is at least one macro attachment. The button
is grey or green, depending on the settings in the menu Personality / Panel
/ MaKE Memo Attachment Playmode.
For details refer to section 3.16.4.2.
Recall Preset
Factory Preset
Operation Preset
Undo