Grass Valley XtenDD v.4.2.4 - Manual (Page 192)

3. Menu Operation
3 – 45 Operating Instructions – Rev. 1 / 7.2002
Shdw Store The Shadow Store (optional) serves to produce a shadow that can be positioned
over the entire picture. The shadow is generated by the shadow store and can be
positioned with the trackball.
Note: If the shadow is positioned before or above the original, the shadow
is delayed by one frame.
Border The Border button serves to generate a simple border. The width of the border is
adjustable (number of picture lines: H and 2H).
Extrude The Extrude button serves to produce a shadow of the key. The width of the
shadow is adjustable (number of picture lines: H, 2H, 3H and 4H).
Drop The Drop button serves to produce a drop shadow of the key. The width of the
shadow is adjustable (number of picture lines: H, 2H, 3H and 4H).
Outline If Outline is pressed, only the outline of the key is faded in. The outline signal is
filled with the background signal. The width of the outline is adjustable (number of
picture lines: H and 2H).
Position The Position control permits changing the position of the border in steps.
Note: Please note that the position of the original signal changes when you
position a shadow above or before the border signal.
B-Opacity The B-Opacity control serves to change the transparency of the border.
Width The Width control serves to change the width of the border
D
Border: H and 2H;
D
Extrude / Drop: H, 2H, 3H and 4H;
D
Outline: H and 2H.
Reset of the Positioning, Sizing and Softening parameters.
For details refer to section Introduction.
For details refer to section Introduction.
P/S/S
Transfer
Menu Lock