Grass Valley XtenDD v.4.2.4 - Manual (Page 37)

2. Panel Operation
2 – 8 Operating Instructions – Rev. 1 / 7.2002
Play a Macro To play a macro or a sequence
D
Press MaKE button.
D
Select the macro button on the key bus row of the P/P stage. While the macro
is executed, the button is blinking. Pressing the button while the macro is still
running stops the macro. After stopping or terminating the macro, the button
lamp lit.
Selecting the button while the macro ist stopped or at the end, starts the macro
at the beginning.
While the macro is running, no other macro can be started, recorded or deleted.
Delete a Macro To delete a macro or a sequence
D
Press ME2/Del button and hold it down and select the macro with the buttons
of the key bus row.
Joining Macros
D
Pressing another macro button during a macro recording, the macro associ-
ated to this button is not started but its data is added to the recorded macro.
Note:
Button lamp of current macro blinking in single speed while playing. Lamp of cur-
rent macro and delegation lamp blinking in double speed while recording.
Lamp of last played keeps lit. If the last played macro is deleted, the lamp will be
switched off. After a reset, the last played macro is undefined and so no lamp is on
to indicate the “last” state.