Grass Valley XtenDD v.4.2.4 - Manual (Page 170)

3. Menu Operation
3 – 23 Operating Instructions – Rev. 1 / 7.2002
3.5.2 SELECTING THE M/E MAIN MENUS
Press the associated dialog button to select the associated M/E Main menu which
serves to modify the switcher parameters.
3.5.3 ENABLE / DISABLE THE FADERS
Press the associated button to enable or disable the panel fader of the individual
mixing levels and the menu fader in the M/E Main menus.
The active status is displayed in the button.
Press the associated button to enable or disable the fader in the Master Control
panel.
The active status is displayed in the button.
3.5.4 DVE MAPPING
By selecting DVE 1/2 Mapping in the Status menu, the buttons DVE1 / DVE2 of
the Wipe and Machine Control panel section can be mapped to following sources:
M/E1
M/E2
M/E3
P/P
Fader Active:
M/E1, M/E2
M/E3, P/P
Fader Active:
Machine Control
DVE 1 Mapping
DVE 2 Mapping