Grass Valley XtenDD v.4.2.4 - Manual (Page 136)

2. Panel Operation
2 – 107 Operating Instructions – Rev. 1 / 7.2002
2.15.5 CONTROLLING THE MASTER TIM/E MEMOS FROM THE MACHINE CONTROL SECTION
TiM/E Memo can be controlled by the VTR keypad in the Machine Control section
of the panel.
If a register containing a timeline has been selected in the Master TiM/E Memo, the
timeline can be played with the VTR keypad, in normal (forward) or reverse (back-
ward) direction and this with normal (1x) or fast (<128x) speed. Stop sets the speed
to “0” but does not end playing the timeline, so playing can be resumed after a Stop
has been issued. To end playing the timeline, Cut in the Master TiM/E Memo sec-
tion has to be pressed.
Note:
A timeline started with Cut, Auto or with the fader cannot be controlled by the
VTR keypad and vice versa.
Machine Control
2
DVE
1
DVE
MP 1 MP 2 MP 3 MP 4
In
Goto
Out
Norm
Rev
Stop
Rev Next
Memo
TiM/E
Mark Mark
X X X X X X X X X X X X X X X X
Shtl Var Jog
Rec
2nd
fast forward fast backward
Play backward
Stop
Play foreward Delegation button
Timeline pauses at next keyframe.
Reverse: Timeline is played in reverse direction.
Timeline play changes running direction at each end.
Stop/Next
Rev
Norm/Rev