Grass Valley XtenDD v.4.2.4 - Manual (Page 113)

2. Panel Operation
2 – 84 Operating Instructions – Rev. 1 / 7.2002
2.14.2 MOTION COMMANDS
Press one of the following buttons to send a motion command to the device. The
3 keys located over the Fader will have the following functions if the Machine Con-
trol section is delegated to a MPx control.
Norm
Rev
Stop
Rev Next
Shtl Var Jog
REWIND Press the << button to send a REWIND command to the device.
VARIABLE Press the < button to send a VARIABLE reverse command to the
device (speed = –1 X).
STOP Press the
J
button to send a STOP command to the device.
PLAY Press the > button to send a PLAY command to the device.
REC Press REC and > button to send a RECORD
(normal record = crash record) command to the device.
FAST Press the >> button to send a FAST FORWARD command to
FORWARD the device.
STEP Hold J and press > to send a field STEP forward
Hold
J
and press < to send a field STEP revers
Caution:
The DD35 protocol driver will send RS422 STEP commands.
This commands will not be supported by some VTR types.
JOGGING Press the Jog button to enter the Jogging mode. In Jogging mode
the TrackBall located in the Positioner section of the DD35 panel
will be used. The TrackBall has to be delegated as Jog knob.
This is done by the auto delegation feature whenever the Jog
button is activated.