Grass Valley XtenDD v.4.2.4 - Manual (Page 140)

2. Panel Operation
2 – 111 Operating Instructions – Rev. 1 / 7.2002
2.17 USER PROGRAMMABLE KEYS (UPKs)
Dedicated pushbutton functions of the control panels can be configured
for different tasks. For indication purposes the control panel is delivered with addi-
tional pushbutton inlays.
The programming can be made in the menu Install / Panel / UPK.
The following buttons are programmable:
Button Panel Section
UPK upper / Limit Set Transition
UPK lower / Limit On Transition
DVE Transition
Mix Transition
Wipe1 Transition
Wipe2 Transition
BlkPst Transition
Recall99 TiM/E
Loop Transition
Trans PVW Transition
NextTrans Bgd B Transition
NextTrans Bgd A Transition
NextTrans Key 1 Transition
NextTrans Key 2 Transition
NextTrans Key 3 Transition
UPK Left 0, 1 Transition
UPK Right 0..11 Transition