Grass Valley Aurora Edit v.7.0 - Manual (Page 90)

10. Repeat steps 7-9 to create additional clips.
11. To use additional tapes, insert a new tape into the VTR and repeat the steps above.
Aurora Edit asks you for the new tape name when you add the first clip to the
Batch Capture list.
When you are done creating your Batch Capture list, you can save it or record the
clips to the Bin.
Rearranging the Batch Capture list
Once you have clips in the Batch Capture list, you can rearrange them if you need to.
• Use the following buttons to rearrange your list:
Function Button
Clears the Batch Capture list.
Moves the selected clip down in the list.
Moves the selected clip up in the list.
Deletes the selected clip.
Adds the selected clip to the batch capture list.
Replaces the selected clip with the new Settings. Click Replace
with current deck presets instead of Add from deck presets after
marking a new clip.
Changing row colors in the Batch Capture list
You can change the way Aurora Edit displays rows in the Batch Capture List.
1. In the Batch Capture list, click the Settings button.
90 Aurora Edit User Guide 08 April 2010
Acquiring media