Grass Valley Aurora Edit v.7.0 - Manual (Page 158)

1. Press 7 on your keyboard or click the Audio Effects Tool button.
2. Click the Voice Disguise tab to bring it to the front of the window.
3. Select the clip you want to disguise.
To select multiple clips, hold down the Ctrl key while clicking on clips.
4. Adjust the pitch and use the randomizer as necessary.
5. Click Apply to apply your changes.
The voice disguise adds to your clip, and a new master clip is created and saved to
the Rendered Clips bin.
Pitch Adjustment and Randomizer parameters
When you adjust pitch you also adjust the tone of a voice. Adjusting the pitch less
than 1x makes the audio sound slower and lower. Adjusting the pitch greater than 1x
makes the audio sound faster and higher. A lower pitch is typical for a blur or mosaic
video disguise.
You also can apply the Randomizer along with the Pitch Adjustment. The Randomizer
periodically alters the Pitch Adjustment in order to further skew the audio, therefore
better disguising the voice.
Default Range Dial
1x .5x to 2x Pitch Adjustment
0 0 to 30 Randomizer
158 Aurora Edit User Guide 08 April 2010
Audio