Grass Valley Aurora Edit v.7.0 - Manual (Page 150)

Mute audio tracks using one of these methods:
• In the Audio Mixer Tool, click the Mute button for each audio track you
want to mute.
• In the Timeline, click the Expand Track button in the audio track you want
to mute, then click the Mute button.
When you activate Mute in one of these tools, the button gets activated
automatically in the other tool.
To turn off muting, click each Mute button again.
Using the Master Audio Sliders to set output level
You use the Master Audio Sliders to adjust the output level for your final sequence.
When you output audio, the 16 audio tracks are mixed down to four or fewer tracks.
The pan direction determines how tracks are mixed. By default, odd-numbered tracks
mix to channel one and even-numbered tracks mix to channel two of your output
sequence.
1. If you want to adjust pairs of channels simultaneously, check the Master Gang
checkbox.
If all audio channels are not visible, click Expand Channels .
2. Drag the level slider up or down for each pair of channels to set the output volume.
150 Aurora Edit User Guide 08 April 2010
Audio