Grass Valley Aurora Edit v.7.0 - Manual (Page 152)

Audio output routes to... If the pan control is in this position...
Channel 1 Left
Channel 2 Right
All channels Center
If you have more than eight audio tracks in your sequence, click the Bank
Select arrow to move to Bank 2 and then make your changes for the additional
tracks.
Adjusting audio gain
Adjust the audio gain to adjust the audio levels within a clip in your sequence.
Audio may record in at levels that are too low or too high. The Audio Gain feature
lets you compensate by adjusting the clip. You can adjust the audio between -41 dB
and +10 dB. To adjust an audio clip, you can use the Timeline Tool, the Trim Tool,
or the Audio Mixer Tool.
1. Select the clip you need to adjust.
2. Right-click in the appropriate audio track and choose Adjust Audio Gain .
The Adjust Audio Gain dialog box appears.
3. Enter a new value for the audio gain:
• To lower the gain, enter a value preceeded by a minus sign, such as -5.
• To raise the gain, enter a value, such as 5.
4. Click OK .
The new value appears for the audio clip.
Related Links
Changing audio levels in a clip on page 148
152 Aurora Edit User Guide 08 April 2010
Audio