H3C Technologies H3C SR8800 - Manual (Page 25)

13
To enable the NQA client:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable the NQA client. nqa agent enable
Optional
Enabled by default
Creating an NQA test group
Create an NQA test group before you configure NQA tests.
To create an NQA test group:
Step Command Remarks
1. Enter system view. system-view N/A
2. Create an NQA test group
and enter the NQA test group
view.
nqa entry admin-name
operation-tag
In the NQA test group view, you
can specify the test type.
You can use the nqa entry
command to enter the test type
view of an NQA test group with
test type configured.
Configuring an NQA test group
Configuring ICMP echo tests
ICMP echo tests of an NQA test group are used to test reachability of a destination host according to the
ICMP echo response information. An ICMP echo test has the same function as the ping command but
provides more output information. In addition, you can specify the next hop for ICMP echo tests. ICMP
echo tests are used to locate connectivity problems in a network.
To configure ICMP echo tests:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter NQA test group view.
nqa entry admin-name
operation-tag
N/A
3. Configure the test type as
ICMP echo and enter test type
view. type icmp-echo N/A
4. Configure the destination
address of ICMP echo
requests. destination ip ip-address
By default, no destination IP
address is configured.
5. Configure the size of the data
field in each ICMP echo
request. data-size size
Optional.
100 bytes by default.