beautypg.com

Outputting system information to the console – H3C Technologies H3C SR8800 User Manual

Page 190

background image

178

Outputting system information to the console

Outputting system information to the console

Step Command Remarks

1.

Enter system view.

system-view

N/A

2.

Enable information
center.

info-center enable

Optional.
Enabled by default.

3.

Name the channel with a

specified channel
number.

info-center channel channel-number
name channel-name

Optional.
See

Table 7

for default channel

names.

4.

Configure the channel
through which system

information can be output

to the console.

info-center console channel
{ channel-number | channel-name }

Optional.
By default, system information is
output to the console through

channel 0 (known as console).

5.

Configure the output rules

of system information.

info-center source { module-name |
default } channel { channel-number |
channel
-name } [ debug { level severity |

state state } * | log { level severity | state

state } * | trap { level severity | state

state } * ] *

Optional.
See “

Default output rules of system

information

.”

6.

Configure the format of

the time stamp.

info-center timestamp { debugging | log
| trap } { boot | date | none }

Optional.
The time stamp format for log,

trap and debugging information
is date by default.

Enabling the display of system information on the console

After setting to output system information to the console, you need to enable the associated display

function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the console:

Step Command

Remarks

1.

Enable the monitoring of

system information on the

console.

terminal monitor

Optional.
Enabled on the console and disabled on
the monitor terminal by default.

2.

Enable the display of
debugging information on the

console.

terminal debugging

Disabled by default.

3.

Enable the display of log
information on the console.

terminal logging

Optional.
Enabled by default.

4.

Enable the display of trap

information on the console.

terminal trapping

Optional
Enabled by default.