H3C Technologies H3C SR8800 - Manual (Page 155)

143
Figure 52 Recorded AS information varies with different keywords
Configuring refresh rate for NetStream version 9 templates
Version 9 is template-based and supports user-defined formats, so the NetStream-enabled router needs
to resend a new template to the NetStream server for an update. If the version 9 format is changed on
the router and not updated on the NetStream server, the server is unable to associate the received
statistics with its proper fields. To avoid such situation, configure the refresh frequency and rate for version
9 templates so that the NetStream server can refresh the templates on time.
To configure the refresh rate for NetStream version 9 templates:
Step Command Remarks
1. Enter system view. system-view N/A
2. Configure the refresh frequency
for NetStream version 9
templates.
ip netstream export v9-template
refresh-rate packet packets
Optional.
By default, the version 9 templates
are sent every 20 packets.
3. Configure the refresh interval
for NetStream version 9
templates.
ip netstream export v9-template
refresh-rate time minutes
Optional.
By default, the version 9 templates
are sent every 30 minutes.
NOTE:
The refresh frequency and interval can be both configured, and the template is resent when either of the
condition is reached.
AS 20 AS 21
AS 22
AS 23
Enable NetStream
Include origin-as in the command.
AS 20 is recorded as the source AS and
AS 24 as the destination AS.
AS 24
Include peer-as in the command.
AS 21 is recorded as the source AS, and
AS 23 as the destination AS.