H3C Technologies H3C SR8800 - Manual (Page 169)

157
Configuring IPv6 NetStream
Configuring QoS-based IPv6 NetStream
NOTE:
NetStream-capable cards include NAM cards, SPC cards, and SPE cards. A QoS policy cannot be
applied to the outgoing traffic of interfaces on SPC cards. For information about configuring NetStream
on an SPC card, see “
Configuring IPv6 NetStream on an SPC card .”
Before configuring IPv6 NetStream, configure QoS first to identify the traffic matching the classification
criteria and configure a traffic behavior with the action of mirroring the identified traffic to a NetStream
interface of a NetStream-capable card (SPC card, SPE card, or NAM card). For more information about
class, traffic behavior, and QoS policy, see ACL and QoS Configuration Guide.
To configure QoS-based IPv6 NetStream:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable IPv6 NetStream. ipv6 netstream
By default, IPv6 NetStream is
disabled.
3. Define a class and enter its
view. traffic classifier classifier-name
[ operator { and | or } ]
N/A
4. Define a match criterion. if-match match-criteria N/A
5. Return to system view. quit N/A
6. Create a traffic behavior and
enter traffic behavior view.
traffic behavior behavior-name N/A
7. Configure the action of
mirroring traffic to the
NetStream interface.
mirror-to interface Net-Stream
interface-number By default, no action of traffic
mirroring is configured.
8. Return to system view. quit N/A
9. Create a policy and enter its
view.
qos policy policy-name N/A
10. Specify a behavior for a class
in the policy. classifier classifier-name behavior
behavior-name
N/A
11. Return to system view. quit N/A
12. Enter interface view.
interface interface-type
interface-number
N/A
13. Apply a QoS policy.
qos apply policy policy-name
{ inbound | outbound }
N/A
Configuring IPv6 NetStream on an SPC card