beautypg.com

Configuring ipv6 netstream aggregation data export – H3C Technologies H3C SR8800 User Manual

Page 174

background image

162

To configure IPv6 NetStream traditional data export:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Configure the destination
address for the IPv6

NetStream traditional

data export.

ipv6 netstream export host
ip-address udp-port [ vpn-instance

vpn-instance-name ]

By default, no destination address is
configured, in which case, the IPv6
NetStream traditional data is not

exported.

3.

Configure the source
interface for IPv6

NetStream traditional

data export.

ipv6 netstream export source
interface interface-type

interface-number

Optional.

By default, the interface connecting

to the NetStream server is used as
the source interface.

H3C recommends you connect the

network management interface to
the NetStream server and configure

it as the source interface.

4.

Limit the data export rate. ipv6 netstream export rate rate

Optional.
By default, the data export rate is not
limited.

Configuring IPv6 NetStream aggregation data export

Before configuring the IPv6 NetStream traditional data export, enable IPv6 NetStream first.
To configure IPv6 NetStream aggregation data export:

Step Command

Remarks

1.

Enter system view. system-view

N/A

2.

Set an IPv6
NetStream

aggregation

mode and enter

its view.

ipv6 netstream aggregation { as
| destination-prefix | prefix |

protocol-port | source-prefix |

bgp-nexthop }

N/A

3.

Configure the
destination

address for the

IPv6 NetStream
aggregation data

export.

ipv6 netstream export host
ip-address udp-port

[ vpn-instance

vpn-instance-name ]

By default, no destination address is configured
in IPv6 NetStream aggregation view. Its default
destination address is that configured in system

view, if any.
If you expect to export only IPv6 NetStream

aggregation data, configure the destination
address in related aggregation view only.