Verifying the configuration – H3C Technologies H3C SR8800 User Manual
Page 131
119
[RouterA-GigabitEthernet3/0/1] quit
# Configure the address and port number of NSC as the destination host for NetStream data export,
leaving the default for source interface.
[RouterA] ip netstream export host 12.110.2.2 5000
Verifying the configuration
# Execute the display sampler command on Router A to view the configuration and running information
about sampler 256. The output shows that Router A received and processed 256 packets, which reached
the number of packets for one sampling, and Router A selected the first packet out of the 256 packets
received on GigabitEthernet 3/0/1.
Sampler name: 256
Index: 1, Mode: Fixed, Packet-interval: 8
This manual is related to the following products:
- H3C SR6600-X H3C SR6600 H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000 H3C WX3000E Series Wireless Switches H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module