H3C Technologies H3C S7500E Series Switches - Manual (Page 96)

3-14
Task Remarks
Tuning MPLS TE Tunnel Setup Optional
Forwarding traffic along MPLS TE tunnels
using static routes
Configuring Traffic Forwarding
Forwarding traffic along MPLS TE tunnels
through automatic route advertisement
Required
Use any approach
Configuring Traffic Forwarding Tuning Parameters Optional
Configuring CR-LSP Backup Optional
Configuring FRR Optional
Inspecting an MPLS TE Tunnel Optional
Configuring MPLS TE Basic Capabilities
MPLS TE basic capabilities are essential to MPLS TE feature configurations. After configuring the
basic capabilities, you need to make other configurations in order to use MPLS TE depending on the
actual requirements.
Configuration Prerequisites
Before the configuration, do the following:
z
Configure static routing or IGPs to make sure all LSRs are reachable.
z
Configure MPLS basic capabilities.
For configuration information about MPLS basic capability, see MPLS Basics Configuration in the
MPLS Configuration Guide .
Configuration procedure
Follow these steps to configure MPLS TE basic capabilities:
To do… Use the command… Remarks
Enter system view system-view ––
Enter MPLS view mpls ––