H3C Technologies H3C S7500E Series Switches - Manual (Page 124)

3-42
To do… Use the command…
Use MPLS LSP
tracert to locate errors
of an MPLS TE tunnel
tracert lsp [ -a source-ip | -exp exp-value | -h ttl-value | -r reply-mode |-t time-out ] *
te interface-type interface-number
Displaying and Maintaining MPLS TE
Displaying and Maintaining MPLS TE
To do… Use the command… Remarks
Display information about explicit
paths
display explicit-path [ pathname ] Available in any view
Display information about static
CR-LSPs
display mpls static-cr-lsp
[ lsp-name lsp-name ] [ { include |
exclude } ip-address
prefix-length ] [ verbose ]
Available in any view
Display RSVP-TE configuration
display mpls rsvp-te [ interface
[ interface-type interface-number ]
[ | { begin | exclude | include }
regular-expression ] ]
Available in any view
Display global or interface
RSVP-TE information
display mpls rsvp-te established
[ interface interface-type
interface-number
] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display RSVP-TE neighbors
display mpls rsvp-te peer
[ interface interface-type
interface-number
] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display information about RSVP
requests
display mpls rsvp-te request
[ interface interface-type
interface-number
] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display information about RSVP
resource reservation
display mpls rsvp-te reservation
[ interface interface-type
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view