H3C Technologies H3C S7500E Series Switches - Manual (Page 75)

2-33
To do… Use the command… Remarks
Display information about LDP
peers
display mpls ldp peer [ all
[ verbose ] | [ vpn-instance
vpn-instance-name ] [ peer-id |
verbose ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display information about LDP
remote peers
display mpls ldp remote-peer
[ remote-name
remote-peer-name ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display information about LDP
sessions between LDP peers
display mpls ldp session [ all
[ verbose ] | [ vpn-instance
vpn-instance-name ] [ peer-id |
verbose ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display statistics information about
all LSP sessions
display mpls ldp session all
statistics
Available in any view
Display information about LSPs
established by LDP
display mpls ldp lsp [ all |
[ vpn-instance
vpn-instance-name ] [ dest-addr
mask-length ] ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display information about
CR-LSPs established by CR-LDP
display mpls ldp cr-lsp [ lspid
lsr-id lsp-id ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
In the above commands, vpn-instance vpn-instance-name is used to specify information about an
LDP instance. For information about LDP instances, see MPLS L3VPN Configuration in the MPLS
Configuration Guide .