H3C Technologies H3C S7500E Series Switches - Manual (Page 24)

1-12
To do… Use the command… Remarks
Redistribute routes from
the remote site
advertised by the PE
import-route protocol
[ process-id ] [ allow-ibgp ]
[ cost cost | route-policy
route-policy-name | tag tag ] *
Required
By default, RIP does not redistribute routes
from other protocols.
After enabling RIP for a VPN instance, you need also to configure to use RIP for routing information
exchange.
Configuring to Use OSPF between a MCE and a Site
An OSPF process can be bound to only one VPN instance. OSPF processes not bound to any VPN
instances belong to the public network.
Follow these steps to configure OSPF between a MCE and a site:
To do… Use the command… Remarks
Enter system view system-view —
Enable OSPF for a VPN
instance (this operation
also leads you to OSPF
view)
ospf [ process-id | router-id
router-id | vpn-instance
vpn-instance-name ] *
Required
This operation is performed on the MCE
device. As for the corresponding configuration
on the site, you can just enable OSPF as usual.
Enable
multi-VPN-instance CE
for the OSPF process
vpn-instance-capability
simple
Required
Disabled by default
Redistribute routes from
the remote site
advertised by the PE
import-route protocol
[ process-id | allow-ibgp ]
[ cost cost | type type | tag
tag | route-policy
route-policy-name ] *
Required
Not redistributed by default
Configure the OSPF
domain ID
domain-id domain-id
[ secondary ]
Optional
By default, the OSPF domain ID is 0.
This operation is performed on the MCE
device. As for the corresponding configuration
on the site, you can just enable OSPF as usual.