H3C Technologies H3C S7500E Series Switches - Manual (Page 126)

3-44
To do… Use the command… Remarks
Display statistics about MPLS TE
tunnels
display mpls te tunnel-interface
tunnel number
Available in any view
Display the information of the
specified or all OSPF processes
about traffic tuning.
display ospf [ process-id ]
traffic-adjustment
Available in any view
Display information about OSPF
TE
display ospf [ process-id ] mpls-te
[ area area-id ] [ self-originated ]
Available in any view
Display the latest TE information
advertised by IS-IS TE
display isis traffic-eng
advertisements [ level-1 | level-1-2
| level-2 ] [ lsp-id lsp-id | local ]
[ process-id | vpn-instance
vpn-instance-name ]
Available in any view
Display information about TE links
for IS-IS
display isis traffic-eng link
[ level-1 | level-1-2 | level-2 ]
[ verbose ] [ process-id |
vpn-instance
vpn-instance-name ]
Available in any view
Display information about TE
networks for IS-IS
display isis traffic-eng network
[ level-1 | level-1-2 | level-2 ]
[ process-id | vpn-instance
vpn-instance-name ]
Available in any view
Display statistics about TE for
IS-IS
display isis traffic-eng statistics
[ process-id | vpn-instance
vpn-instance-name ]
Available in any view
Display information about tunnels
display tunnel-info { tunnel-id | all
| statistics }
Available in any view
Clear the statistics about
RSVP-TE
reset mpls rsvp-te statistics
{ global | interface [ interface-type
interface-number ]
Available in user view
MPLS TE Configuration Examples
MPLS TE Using Static CR-LSP Configuration Example
Network requirements
z
Switch A, Switch B, and Switch C run IS-IS.
z
Establish a TE tunnel using a static CR-LSP between Switch A and Switch C.