H3C Technologies H3C S7500E Series Switches - Manual (Page 28)

1-16
To do… Use the command… Remarks
Configure the PE as a peer
peer { group-name | ip-address }
as-number as-number
Required
Configure to import routes
import-route protocol [ process-id ]
[ med med-value | route-policy
route-policy-name ] *
Optional
The site must advertise the
addresses of the reachable VPN
segments to the MCE connected
to the site.
In a VPN instance with BGP enabled, the BGP route exchange is processed in the same way as
those in a normal BGP-enabled network.
Configuring Route Exchange between a MCE and a PE
Configuring Route Exchange between a MCE and a PE
Complete the following tasks to configure route exchange between a MCE and a PE:
Task Remarks
Configuring to Use Static Routes between a MCE and a PE
Configuring to Use RIP between a MCE and a PE
Configuring to Use OSPF between a MCE and a PE
Configure to Use IS-IS between a MCE and a PE
Configure to Use EBGP between a MCE and a PE
You can choose one or multiple
configurations as required.
Configuring to Use Static Routes between a MCE and a PE
Follow these steps to define a static route for a VPN instance: