H3C Technologies H3C S7500E Series Switches - Manual (Page 191)

4-31
100 vlan 2.2.2.9 134312 138882 1 up
100 vlan 3.3.3.9 134216 140476 2 block
# Use the display vpls fib vsi vpna verbose command to display the forwarding table information of
the VPLS instance on Switch A.
[SwitchA] display vpls fib vsi vpna verbose
VSI Name: vpna VSI Index: 0
**Link ID : 1
Role : Primary
State : Active
In Label : 134312
Out Label : 138882
TnlType : LDP-LSP
MTU : 1500
Tunnel ID : 0x1130214
Next Hop : 12.1.1.2
Out IfIndex : 61997067
**Link ID : 2
Role : Backup
State : Standy
In Label : 134216
Out Label : 140476
TnlType : LDP-LSP
MTU : 1500
Tunnel ID : 0x1130215
Next Hop : 13.1.1.3
Out IfIndex : 61997068
# Disconnect the link between Switch A and Switch B. Then, execute the display vpls connection
vsi vpna command. You can see that the link to 2.2.2.9 is down.
display vpls connection vsi vpna
Total 2 connection(s),
connection(s): 1 up, 0 block, 1 down
VSI Name: vpna Signaling: ldp
VsiID VsiType PeerAddr InLabel OutLabel LinkID VCState
100 vlan 2.2.2.9 134312 138882 1 down
100 vlan 3.3.3.9 134216 140476 2 up
Troubleshooting VPLS
Symptom:
The VPLS link PW is not up.
Analysis:
z
The public network LSP tunnel is not established.
z
The extended session is not working normally.
Solution: