H3C Technologies H3C S7500E Series Switches - Manual (Page 202)

5-10
z
Configuring MPLS basic capability and MPLS LDP for the MPLS backbone on the PEs and P
devices to establish LDP LSPs
z
Enabling MPLS L2VPN on the PEs
z
Establishing remote LDP sessions between PEs
z
For VLAN access, configuring a subinterface; for ATM access, configuring a VC
To configure Martini MPLS L2VPN, you need the following data:
z
Types and numbers of the interfaces connecting the CEs
z
Destination address of the L2VPN connection and the PW ID, that is, VC ID
z
PW class template
Configuring the Remote Peer
Follow these steps to configure the remote peer for a PE:
To do… Use the command… Remarks
Enter system view system-view —
mpls ldp remote-peer
remote-peer-name
Required
Configure the remote peer
remote-ip ip-address Required
For remote peer configuration information, see MPLS Basics Configuration in the MPLS Configuration
Guide .
Creating a Martini MPLS L2VPN Connection on a VLAN Inerface
On a PE, follow these steps to create a Maritini MPLS L2VPN connection on a VLAN interface:
To do… Use the command… Remarks
Enter system view system-view —
Enter the view of the interface
connecting the CE
interface interface-type
interface-number
—
Create a Martini MPLS L2VPN
connection
mpls l2vc destination vcid
[ tunnel-policy
tunnel-policy-name ]
[ control-word |
no-control-word ]
Required