H3C Technologies H3C S7500E Series Switches - Manual (Page 118)

3-36
z
The metric type configured in MPLS TE tunnel interface view takes priority over the one
configured in MPLS view.
z
If you do not configure the mpls te path metric-type command in MPLS TE tunnel interface view,
the configuration in MPLS view takes effect.
Configuring the traffic flow type of a tunnel
Follow these steps to configure the traffic flow type of a tunnel:
To do… Use the command... Remarks
Enter system view system-view ––
Enter MPLS TE tunnel interface
view
interface tunnel tunnel-number ––
Configure the traffic flow type of
the TE tunnel
mpls te vpn-binding { acl
acl-number | vpn-instance
vpn-instance-name }
Optional
Traffic flow types of TE tunnels are
not restricted by default.
Submit current tunnel
configuration
mpls te commit Required
Configuring CR-LSP Backup
CR-LSP backup provides end-to-end path protection to protect the entire LSP.
Configuration Prerequisites
Before configuring CR-LSP backup, do the following:
z
Configure MPLS basic capabilities
z
Configure MPLS TE basic capabilities
z
Configure MPLS TE tunnels
Configuration Procedure
Follow these steps to configure CR-LSP backup:
To do… Use the command... Remarks
Enter system view of the ingress
node
system-view ––