H3C Technologies H3C S7500E Series Switches - Manual (Page 29)

1-17
To do… Use the command… Remarks
Enter system view system-view —
ip route-static dest-address { mask | mask-length }
{ gateway-address | interface-type interface-number
[ gateway-address ] | vpn-instance
d-vpn-instance-name gateway-address } [ preference
preference-value ] [ tag tag-value ] [ description
description-text ]
Define a static route
for a VPN instance ip route-static vpn-instance
s-vpn-instance-name& <1-6> dest-address { mask |
mask-length } { gateway-address [ public ] |
interface-type interface-number [ gateway-address ] |
vpn-instance d-vpn-instance-name gateway-address }
[ preference preference-value ] [ tag tag-value ]
[ description description-text ]
Required
By default, for a static
route, the preference value
is 60, the tag value is 0,
and no description
information is configured.
Set the default
preference value of
static routes
ip route-static default-preference
default-preference-value
Optional
By default, the preference
value of a static route is
60.
z
A static route configured for a VPN instance does not take effect if you configure the next hop
address of the route as the IP address of a local interface (such as Ethernet interface, VLAN
interface).
z
If the default static route preference is not configured, the preference of a newly defined static
route adopts the system default preference value, which is 60. A customized default static route
preference has no effect on existing static routes.
z
Static routes can be controlled selectively by using routing policies according to the tag values
set for static routes.
z
The ip route-static command defines a default route if both the destination address and the
mask are set to 0.0.0.0.
Configuring to Use RIP between a MCE and a PE
When configuring to use RIP between a MCE and a PE, you need to configure the RIP processes to
be bound to the VPN instances and manually import the VPN routes in the site maintained by the
MCE device to the routing table of the PE.
Follow these steps to enable RIP for a VPN instance: