H3C Technologies H3C S7500E Series Switches - Manual (Page 205)

5-13
z
Name, RD, and VPN Target attributes of the L2VPN connection
z
CE name, CE ID, and CE range
z
CE offset
Configuration Procedure
Configuring BGP L2VPN capability
Follow these steps to configure BGP L2VPN capability:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Establish the peer relationship with
the peer PE
peer { group-name | ip-address }
as-number as-number
Required
Specify the interface for the TCP
connection
peer { group-name | ip-address }
connect-interface interface-type
interface-number
Required
Enter BGP L2VPN address family
view
l2vpn-family Required
Enable the filtering by the VPN
target extended community
attributes for the received routing
information
policy vpn-target
Optional
Enabled by default
Enable the specified peer or peers
to exchange BGP routing
information of the BGP-L2VPN
address family
peer { group-name | ip-address }
enable
Required
For information about the configuration of BGP-L2VPN address family, see MPLS L3VPN
Configuration in the MPLS Configuration Guide.
Configuring VPN
Follow these steps to configure VPN:
To do… Use the command… Remarks
Enter system view system-view —